MUFAN CO2 SPLITTER 5 WAY

Description

Description 

5 Way CO2 Splitter for Solenoid and Regulator for long-lasting durability and dependability With this splitter, you can connect up to five CO2 diffusers/supplies from a single CO2 cylinder Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow Easy setup, no modification required to your CO2 regulator

• Split your CO2 supply from one source to five outputs.
• Easy to install, requiring no modification to the regulator.
• No need to purchase multiple regulators and cylinders.
• Accurately adjust flow rate for each output using accurate needle valve.
• Using a splitter on your regulator you can split a single CO2 source to five separate outputs. For example, if you need to power multiple diffusers or have more than one aquarium.

  A splitter saves the cost of purchasing and maintaining more regulators and CO2 cylinders.

  Easy to install; simply screws onto your existing regulator needle valve. Supplied with short and long extension to ensure the splitter assembly is clear of the regulator body or pressure gauges.

• Unscrew compression collar from needle valve or regulator.
• Place small O-ring over needle valve nipple.
• Locate the extension provided with the splitter set. Check there is an O-ring at the end of the extension. The O-ring should be seated at the bottom of the thread.
• Screw the extension end that has the O-ring onto needle valve.
• Locate the splitter assembly and check there is a small and large O-ring deployed on the male thread.
• Screw the splitter onto the extension and tighten fully.
• Adjust flow of CO2 for each output using the needle valves.